Want to build a 3D printer? Want to save some cash and appease the RepRap gods at the same time? I’ll show what parts you can reuse from old 2D printers. Music: Uncle Milk – Dead Ants
Tag: Guides
My 3D Printing Hardware and Accessoire Guides on one page.
3D printing guides – Tuning speeds
Learn how to tune your printer’s axis up to maximum speed!
Quick tips – Making a MK8 hobbed bolt pulley filament drive gear. Thing.
Yet another way of abusing taps! Learn how how to make top-notch hobbed bolts or filament drive gears. Need taps? [US/UK/AU/CA] [DE] Want superb ready-made ones instead?
3D printing guides – Fixing stl files with netfabb
Most .stl files aren’t immediately ready for printing – learn how to easily clean them up and prepare them for the slicer.
Quick tips: Outlaw tapping
Tired of hand-tapping dozens of holes? This method will make machinists cringe, but it totally works. Don’t try this with a one-pass tap, the three-piece tap is required! Also works for steel or smaller threads, simply adjust the torque setting accordingly.
3D printing guides – Bed leveling
Simple procedure, big effect. “Bed leveling” is probably not the best name for the process, as what you’re doing is actually aligning the bed’s surface to the X and Y axis of your printer. Don’t try and use a spirit level for this!
[DE] 3D printing guides – Stellt euer Druckbett ein!
Kleiner Aufwand, große Wirkung.
3D printing guides – Assembling the E3D v6 hotend
Got a new E3D v6 hotend? I’ll show you how to assemble it and what to watch out for.
3D printing guides – Setting up Slic3r
Get started with the world’s most popular 3D printing slicer – Slic3r! Get it at www.slic3r.org