Support me!

/META: New Studio and why i’m even doing all this!

Running a Youtube channel with a focus on quality requires time, space and equipment. I’m spending nearly every free minute doing something 3D-printing related because I enjoy doing it and enjoy creating worthwhile content for you to consume. I have dedicated an entire room to Youtube and 3D printing and have invested in camera, lighting, audio and editing hardware, and while my videos would probably work just as well in 720p and with half the editing effort, knowing that I’m delivering the best quality I can is a huge part of why I keep on making videos.

If you want to show your appreciation for the things I create, here’s what you can do. Most of these are completely free for you!

Watch my videos!

All of them are free to watch and a rising view counter shows me that my content is useful to someone and add to the advertising revenue from YouTube.

Share my content!

Sharing is caring – bring 3D printing knowledge to your friends, too!

Use the Amazon, eBay and Matterhackers affiliate links!

If you buy things on Amazon, eBay or Matterhackers through these affiliate links, I will receive a small advertising fee from these sites – the best part is, you’re not paying anything extra when using them! I’ll sometimes post links that take you straight to relevant articles below my videos, but here are the generic links that take you to the homepage of each shop – you can even add these to your bookmarks for buying anything else!

Amazon – All countries

ebay – All countries

Aliexpress – International shipping

Gearbest – International shipping

Matterhackers – US, International shipping

Prusa Research – International shipping

iGo3D – Germany

3DJake – Europe

If you’re interested, I’ve also compiled all the video gear I personally use into one huge list.

Support directly!

While I’m not a huge fan of asking you for your hard-earned money, if you feel the urge, you can directly donate at or support me with a monthly pledge through Patreon.

YouTube has recently also introduced memberships, which gives you some of the same benefits of a Patreon pledge. Look for the “Join” button under any of my videos or the channel page!

Or if you’re living on the bleeding edge, you can also send Bitcoin through Coinbase!

Donate Bitcoin

No matter if you’re equipping an entire school with new computers through the Amazon links or just throwing me the occasional thumbs up – thank you!