This is TEVO’s newest and shiniest printer yet – will we manage to build it on the first try? 🛒 Get one here [🌐] 👐 This video is licensed as Creative Commons Attribution Share-alike thanks to my supporters on Patreon! Certain elements may not be included in the CC-BY-AS license, e.g. third-party images and music. Trademarks are property of their respective owners. Music © www.davidcuttermusic.co.uk
Category: Build
CNC mill built from a 3D Printer!
Want a CNC mill, but only have a 3D printer? Well, if it’s sufficiently overbuilt you can convert it for less than $100!
Genuine i3 MK2 unboxing & live build – the real deal from Josef Prusa!
Josef Prusa sent me two of the brand-new Prusa i3 MK2 – one ready to go and one as a full kit! We’ll start with the ready-built one and then assemble the kit version. Again, no idea how long it’ll take, but we’ll keep going until the job’s done! Live tips/donations here! This video is licensed as Creative Commons Attribution Share-alike thanks to my supporters on Patreon! Music is Chris Zabriskie – Mario Bava Sleeps In a Little Later Than He Expected To
[All 15 hours] Atom 2.0 Delta 3D printer all-day live build!
/* Youtube only captured the first 12h of this marathon stream – here’s the entire thing, including troubleshooting in the end! */ This will be one massive livestream (probably all day)! I’ll be building the Atom 2.0 Delta kit http://www.atom3dp.com/en/atom2/ Frog @ 10:32:15 This video is licensed as Creative Commons Attribution Share-alike thanks to my supporters on Patreon! Music is Chris Zabriskie – Mario Bava Sleeps In a Little Later Than He Expected To
Decommissioning my workhorse of four years: The Mendel90!
My Mendel90 is on its last legs – these are the things about it that kept me using it for as long as i did as well as what needs to change with its iteration. Infos on the Mendel90 ATX supplies Plum couplings
How to wire your 3D printer!
Don’t want to end up with melted cables in your 3D printer? Want it to be reliable, too? Then wire it up properly! Learn how in this video. This video is sponsored by Alephobjects, Inc! Learn more about their Lulzbot line of open-source 3D printers here Crimping tools! Dupont Larger crimp assortments
My biggest 3D printer yet! Analyzing the CerbrisReborn design
The is my first delta 3D printer and also the first one i’ve completely designed from scratch! After about two years in the making, i’ll call it “done” (for now). In this video, I’ll go through the design and have a look at what worked out and what didn’t.
Project: Make a 3D Printed Bluetooth Audio Amplifier!
Make your own wireless Bluetooth audio amplifier to use with any set of speakers! Amplifier board Boost converter Bluetooth receiver (get the ones that look like USB flash drives) LED voltmeter Speaker Terminal (might not be the exact one)