Part 2 of my guide on all things firmware! Covering everything from the available gcodes over the built-in safety features to using your spare pins for something useful! Part 1 Arduino Marlin download, repository Music by Boxcat Games
Category: 3D Printer Reviews
(exactly what it says on the tin)
3D printing guides – Plastic destruction
Formlabs’ SLA printed sample felt very strong to my hands – find out how well it performs when being put to the test! I’ll be comparing the Formlabs resin part to prints from ABS, PLA and Taulman Bridge. Print settings for each part: – Formlabs SLA sample: Formlabs Form1+, Formlabs white resin, 100µm layers – ABS: Mendel90 w/ E3Dv6, 250°C, 60mm/s, far-east black ABS , Slic3r and 200µm layers – PLA: Printrbot Simple Metal w/ UBIS hotend, 208°C, 40mm/s, Printrbot purple sample PLA , Cura and 200µm layers – Nylon:Continue reading
Honest review: The Printrbot Simple Metal (Kit)
The wooden Printrbot Simple wasn’t exactly a top-notch printer, but it gets the job done. Watch my review of the Simple Metal to find out if they managed to improve things!
[DE] Printrbot Simple Metal Aufbauanleitung: Teil 7 – Verkabelung
Im siebten Teil meiner Aufbauanleitung zum Printrbot Simple Metal Kit verstauen wir die Kabel und schließen das Mainboard an! Danke an http://3dDinge.de für die Bereitstellung des Druckers!
Printrbot Simple Metal Kit assembly: Part 6 – The Y-axis
In the sixth part of my build guide for the Printrbot Simple Metal Kit i’ll show you how to assemble the Y-axis! Thanks to http://3dDinge.de for providing the printer!
[DE] Printrbot Simple Metal Aufbauanleitung: Teil 6 – Die Y-Achse
Im sechsten Teil meiner Aufbauanleitung zum Printrbot Simple Metal Kit bauen wir die Y-Achse fertig auf! Danke an http://3dDinge.de für die Bereitstellung des Druckers!
Printrbot Simple Metal Kit assembly: Part 5 – Extruder and Hotend
In the fifth part of my build guide for the Printrbot Simple Metal Kit we’ll assemble the extruder and hotend! Thanks to http://3dDinge.de for providing the printer!
[DE] Printrbot Simple Metal Aufbauanleitung: Teil 5 – Extruder und Hotend
Teil 5 meiner Aufbauanleitung zum Printrbot Simple Metal Kit! In diesem Video bauen wir den Extruder und das Hotend auf! Danke an http://3dDinge.de für die Bereitstellung des Druckers!
Printrbot Simple Metal Kit assembly: Part 4 – The Y-Arm
In the fourth part of my build guide for the Printrbot Simple Metal Kit i’ll show you how to assemble the front of the Y-Arm! Thanks to http://3dDinge.de for providing the printer!