In the fourth part of my build guide for the Printrbot Simple Metal Kit i’ll show you how to assemble the front of the Y-Arm! Thanks to http://3dDinge.de for providing the printer!
Month: August 2014
[DE] Printrbot Simple Metal Aufbauanleitung: Teil 4 – Y-Arm
Teil 4 meiner Aufbauanleitung zum Printrbot Simple Metal Kit! In diesem Video bauen wir die Front der Y-Achse auf! Danke an 3dDinge für die Bereitstellung des Druckers!
[DE] Printrbot Simple Metal Aufbauanleitung: Teil 3 – Die Z-Achse und Elektronik
Teil 3 meiner Aufbauanleitung zum Printrbot Simple Metal Kit! In diesem Video bauen wir die Z-Achse auf und die Elektronik ein! Die neueren Printrbots (mit Printrboard rev. F) enthalten und benötigen den Adapter nicht. Der Jumper zum Endstop muss aber auf jeden Fall in der Position “HV” stehen. Danke an 3dDinge für die Bereitstellung des Druckers!
Printrbot Simple Metal Kit assembly: Part 3 – Z-axis and electronics
In the third part of my build guide for the Printrbot Simple Metal Kit i’ll show you how to install the Z-axis and the electronics! The newer Printrbots (using the Printrboard rev. F) do not include or require the adpater board. Just make sure the jumper is set to the “HV” position. Thanks to 3dDinge for providing the printer!
[DE] Printrbot Simple Metal Aufbauanleitung: Teil 2 – Die X-Achse
Teil 2 meiner Aufbauanleitung zum Printrbot Simple Metal Kit! In diesem Video bauen wir die X-Achse und das Druckbett auf! Danke an 3dDinge für die Bereitstellung des Druckers!
Printrbot Simple Metal Kit assembly: Part 2 – The X-axis
In the second part of my build guide for the Printrbot Simple Metal Kit i’ll show you how to install the X-axis and the printbed! Thanks to 3dDinge for providing the printer!
Printrbot Simple Metal Kit: Part 1 – Unboxing
Part 1 of my video series on the Printrbot Simple Metal Kit: The Unboxing! Thanks to http://3dDinge.de for providing the printer! Musik by Boxcat Games, C. Scott and Chris Zabriskie
[DE] Printrbot Simple Metal Kit: Teil 1 – Unboxing
Teil 1 meiner Videoserie zum Printrbot Simple Metal Kit: Das Unboxing! Danke an 3dDinge für die Bereitstellung des Druckers! Musik von Boxcat Games, C. Scott und Chris Zabriskie
Honest review: The Ultimaker
Here’s what i think about the original Ultimaker! Pokémon models by Augustin Flowalistik