Teil 3 meiner Aufbauanleitung zum Printrbot Simple Metal Kit! In diesem Video bauen wir die Z-Achse auf und die Elektronik ein! Die neueren Printrbots (mit Printrboard rev. F) enthalten und benötigen den Adapter nicht. Der Jumper zum Endstop muss aber auf jeden Fall in der Position “HV” stehen. Danke an 3dDinge für die Bereitstellung des Druckers!
Day: August 11, 2014
Printrbot Simple Metal Kit assembly: Part 3 – Z-axis and electronics
In the third part of my build guide for the Printrbot Simple Metal Kit i’ll show you how to install the Z-axis and the electronics! The newer Printrbots (using the Printrboard rev. F) do not include or require the adpater board. Just make sure the jumper is set to the “HV” position. Thanks to 3dDinge for providing the printer!