The DIY, 3D printed Teleprompter

tom

4 years ago

I couldn't make videos without this: My 3D Printed Teleprompter! — It was time to upgrade my Teleprompter – here’s what I use it for and what went into making it!

Download the print files and design files

Here are the parts you’ll need besides the printed parts:

295x295mm 3mm polystyrene sheet (acrylic works, too)
Roughly 400x400mm piece of black cloth
A handful of M4x18mm screws and washers (or equivalent imperial size)
A handful of M4 threaded inserts (or equivalent imperial size)
One 1/4″-20 screw for the camera quick release (coinslot preferred)
2x 300mm 15mm dia LWS rods (carbon fiber or aluminum)
Base plate (between Manfrotto plate and rod clamps)
Camera quick release (arca swiss)
Teleprompter quick release (Manfrotto)
10″ LCD

All my video gear

💙 Enjoying the videos? Support my work on Patreon!

Product links are affiliate links – I may earn a commission on qualifying purchases (at no extra cost to you)

Check out my second channel “More Layers” on YouTube for livestreams

You can support me without spending a single penny!