The wooden Printrbot Simple wasn’t exactly a top-notch printer, but it gets the job done. Watch my review of the Simple Metal to find out if they managed to improve things!
Tag: printrbot
Printrbot Simple Metal Kit assembly: Part 7 – Wire management
In the seventh part of my build guide for the Printrbot Simple Metal Kit we’ll clean up the wiring and hook up the printr’s mainboard! Thanks to http://3dDinge.de for providing the printer!
[DE] Printrbot Simple Metal Aufbauanleitung: Teil 4 – Y-Arm
Teil 4 meiner Aufbauanleitung zum Printrbot Simple Metal Kit! In diesem Video bauen wir die Front der Y-Achse auf! Danke an 3dDinge für die Bereitstellung des Druckers!
[DE] Printrbot Simple Metal Aufbauanleitung: Teil 3 – Die Z-Achse und Elektronik
Teil 3 meiner Aufbauanleitung zum Printrbot Simple Metal Kit! In diesem Video bauen wir die Z-Achse auf und die Elektronik ein! Die neueren Printrbots (mit Printrboard rev. F) enthalten und benötigen den Adapter nicht. Der Jumper zum Endstop muss aber auf jeden Fall in der Position “HV” stehen. Danke an 3dDinge für die Bereitstellung des Druckers!
Printrbot Simple Metal Kit assembly: Part 3 – Z-axis and electronics
In the third part of my build guide for the Printrbot Simple Metal Kit i’ll show you how to install the Z-axis and the electronics! The newer Printrbots (using the Printrboard rev. F) do not include or require the adpater board. Just make sure the jumper is set to the “HV” position. Thanks to 3dDinge for providing the printer!
Printrbot Simple Metal Kit assembly: Part 2 – The X-axis
In the second part of my build guide for the Printrbot Simple Metal Kit i’ll show you how to install the X-axis and the printbed! Thanks to 3dDinge for providing the printer!
[DE] Printrbot Simple Metal Aufbauanleitung: Teil 2 – Die X-Achse
Teil 2 meiner Aufbauanleitung zum Printrbot Simple Metal Kit! In diesem Video bauen wir die X-Achse und das Druckbett auf! Danke an 3dDinge für die Bereitstellung des Druckers!
Printrbot Simple Metal Kit: Part 1 – Unboxing
Part 1 of my video series on the Printrbot Simple Metal Kit: The Unboxing! Thanks to http://3dDinge.de for providing the printer! Musik by Boxcat Games, C. Scott and Chris Zabriskie
[DE] Printrbot Simple Metal Kit: Teil 1 – Unboxing
Teil 1 meiner Videoserie zum Printrbot Simple Metal Kit: Das Unboxing! Danke an 3dDinge für die Bereitstellung des Druckers! Musik von Boxcat Games, C. Scott und Chris Zabriskie