Filaments need good tests: This is how I will be reviewing 3D printing filaments with the Filaween 2 tests!
Category: Filaween
What I learned from reviewing 30 different filaments! #Filaween
I’ve reviewed quite a few filaments in Filaween 1.0 – here’s what I learned and what’s to come!
Woodworking with a 3D Printer – PrimaSelect WOOD review! #Filaween
How much wood would a 3D printer print if a 3D printer could print wood? Sorry. That’s horrible. But the PrimaSelect WOOD filament isn’t!
Print the rainbow: UniCoFil’s rainbow PLA filament review! #Filaween
Don’t feel like spending big on a color-mixing hotend? Here’s the easy alternative everyone can use!
Maximum fiber: Markforged’s ONYX and carbon fiber review! #Filaween
Markforged’s machines don’t print many materials, but considering how well their Nylon-based ONYX tested, there might not even be a need to use anything else. And you can make it even stiffer and stronger by adding more and continuous fibers to it!
Feels like ABS, but is PLA – Polymaker’s Polymax review! #Filaween
Sometimes you do want ABS, but don’t feel like printing ABS. I’ve been there.
colorFabb PLA/PHA review – it works! #Filaween
colorFabb is putting its own spin on PLA filament – and it’s subjectively and objectively working out pretty well!
ABS isn’t weak: REC ABS filament review! #Filaween
I might actually change my opinion on ABS after testing this one. This is the first ABS i’ve used in a long while that’s actually decent!
Useful carbon-fiber filament: Matterhackers NylonX review! #Filaween
This is the first carbon fiber composite filament that actually works! But is it actually better than standard materials?