Useful carbon-fiber filament: Matterhackers NylonX review! #Filaween

This is the first carbon fiber composite filament that actually works! But is it actually better than standard materials?

So far, the composite materials in Filaween have been… underperforming, to put it lightly. Matterhacker’s Nylon-X promises to be a material that is actually functional – and it better be, at the price of 144€ per kilogram. It’s a Carbon-Fiber filled Nylon, so you do need a hardened or otherwise wear-resistant nozzle, and store the filament in a dry place.

I printed it at 260°C onto a 65° glue-stick-covered heated bed, and it had a noticeable plasticy smell to it while printing. As with other filled filaments, the slightly textured surface finish makes for an appealing look, though we also see the other side of composites, where overhangs come out perfectly, but bridges are much harder to get right.

When it comes to strength, Nylon-X is starting to show off. Not only are we seeing good stiffness and respectable results for pure material strength, but Nylon-X is the first material where layers seems to completely bond, resulting in nearly identical numbers for the layer adhesion tests.

This means it scores a combined rating of 71kg, putting it in the same bracket as Taulman 910 and some of the PETGs. So while the steep price and the need for a wear-resistant nozzle might not make Nylon-X a material for everyone, it’s still a solid performer, especially for a composite.

🛒 Buy from Matterhackers [🇺🇸]

All data in a nice format
All info on filaween

Filaween playlist


Music by Monstercat