Josef Prusa sent me two of the brand-new Prusa i3 MK2 – one ready to go and one as a full kit! We’ll start with the ready-built one and then assemble the kit version. Again, no idea how long it’ll take, but we’ll keep going until the job’s done! Live tips/donations here! This video is licensed as Creative Commons Attribution Share-alike thanks to my supporters on Patreon! Music is Chris Zabriskie – Mario Bava Sleeps In a Little Later Than He Expected To
Month: August 2016
Can it print at 450mm/s? Dynamo3D OnePro review!
It’s a great time for 3D printing! New control boards, more user-friendly interfaces, faster machines – but aren’t we forgetting something? D3D OnePro Affiliate links: Amazon US eBay US, UK, Canada, Australia Matterhackers Models used: Low-Poly Pokémon by Agustin Flowalistik https://www.youmagine.com/designs/low-poly-chikorita https://www.youmagine.com/designs/low-poly-lapras Zelda Master Sword by Lloyd Roberts https://www.myminifactory.com/object/zelda-master-sword-7579 HexLamp by me (comment if you want to print one for yourself!=
Genuine i3 MK2 unboxing & live build – the real deal from Josef Prusa!
Josef Prusa sent me two of the brand-new Prusa i3 MK2 – one ready to go and one as a full kit! We’ll start with the ready-built one and then assemble the kit version. Again, no idea how long it’ll take, but we’ll keep going until the job’s done! Live tips/donations here! This video is licensed as Creative Commons Attribution Share-alike thanks to my supporters on Patreon! Music is Chris Zabriskie – Mario Bava Sleeps In a Little Later Than He Expected To
[All 15 hours] Atom 2.0 Delta 3D printer all-day live build!
/* Youtube only captured the first 12h of this marathon stream – here’s the entire thing, including troubleshooting in the end! */ This will be one massive livestream (probably all day)! I’ll be building the Atom 2.0 Delta kit http://www.atom3dp.com/en/atom2/ Frog @ 10:32:15 This video is licensed as Creative Commons Attribution Share-alike thanks to my supporters on Patreon! Music is Chris Zabriskie – Mario Bava Sleeps In a Little Later Than He Expected To
How to set up the Marlin firmware!
Setting up the Marlin firmware can be quite overwhelming if you haven’t done it before, but most of the settings are fairly straightforward if you know what they mean. Get Marlin and Arduino at marlinfw.org and arduino.cc This video is sponsored by Alephobjects, Inc! Learn more about their Lulzbot line of open-source 3D printers here http://lulzbot.com/
Dynamo3D OnePro unboxing and first print!
Dynamo3D sent me their newest 3D printer, the OnePro! Join in as we unbox this beast of a machine and try to tame it to get the first print out of it! Dynamo3D OnePro unboxing and first print! This video is licensed as Creative Commons Attribution Share-alike thanks to my supporters on Patreon!
As cheap as it gets: Turnigy Fabrikator Mini 3D Printer review! (TinyBoy)
It’s cheap. But is it good? The Fabrikator Mini tries to be the most affordable 3D printer out there, but i think it leaves out a few too many core features. Last one that’s listed on Hobbyking TinyBoy 2 campaign TinyBoy 1 source files
Decommissioning my workhorse of four years: The Mendel90!
My Mendel90 is on its last legs – these are the things about it that kept me using it for as long as i did as well as what needs to change with its iteration. Infos on the Mendel90 ATX supplies Plum couplings