The Hangprinter is done! These are the things we would build differently next time and the things Torbjørn learned for the project.
Year: 2017
Building a Hangprinter!
If you want to 3D print really large parts, you have two options – either build a really large 3D printer with its own rigid frame or use the frame you already have: Your house! And that’s exactly what the Hangprinter is doing: It’s a fully featured frameless 3D printer that uses the room it’s set up in as a frame and suspends itself from the walls and ceiling with high-strength line.
How to make your 3D printer smart and silent with the TMC2130!
The TMC2130 is a stepper motor driver that is specifically designed for 3D printers – and it works so well that even Prusa is using it on their new MK3! In this video, I’ll show you how to upgrade your own 3D printer with the same driver and get some of the sweet benefits an.
Live: Let’s get some resin prints from the Wanhao Duplicator 7! (D7)
The Wanhao Duplicator 7 resin printer didn’t work out so well on the first try – let’s have a go at it again and make some tiny prints!
Live: Retrying the Sienci Mill One!
The last stream on the $399 Sienci Mill One ended, uhm… abruptly. Let’s try again and get this thing milling!
The toughest filament: Taulman PCTPE review! #Filaween
Taulman are known for making specialty filaments – this is PCTPE, their insanely strong Nylon!
The State of OpenSource #TCT2017
What’s up everyone, Tom here, and today we’re going to look at OpenSource and how the original idea of freely sharing knowledge is getting watered down more and more. And this is a problem!
Twice the Sigma R17: The BCN3D Sigmax! #TCT2017
What do you get when you take the BCN3D Sigma R17, make the print area twice as wide, add support for Cura 2.7 and a make better use of the independent toolheads? Basically, the new Sigmax. Get the regular Sigma here Discuss this video
In-depth look at the Einsy from Prusa’s MK3! #TCT2017
Prusa’s new MK3 comes with a ton of new features, many of which are made possible by the completely re-engineered mainboard! Learn about why the switch away from the Ultimachine RAMBo was necessary, what makes the new Einsy board special and why 8-bit is still totally ok!